Dah lama ga posting2 di blog ternyata kangen juga ya buat ngeblog. ni ada sdikit ilmu yang mungkin berguna bagi yang belum tau.. tapi kalau yang sudah tau mohon jangan ejek postingan saya ini.. maklum.. postingan seorang newbie ya kaya gini.. Dan postingan ini saya Fokuskan Untuk Warnet.
ini saya akan sedikit membagi ilmu tentang bagaimana menggabungkan 2 Modem ADSL kususnya Speedy [karena saya baru praktek pake speedy] ke dalam satu HUB tanpa ada alat bantu ang macem [sepert: mikrotik, server, dan lain2] disini akan aku sharing cara sederhananya.sempat ada teman saya yang tanya "bagaimana si menggabungkan 2 speedy menjadi satu" berikut gambar perkiraan nya....,,,,,,
[ Klik gambar untuk memperbesar]
akan saya coba uraikan dari pertama. berikut langkah langkahnya..
1. Mengganti Gateway Modem
Untuk menggabungkan 2 modem ini di perlukan Gateway Modem yang berbeda. Biasanya Modem yang baru beli masih defaultnya pabrik. untuk itu silahkan masuk ke dalam setingan modem.. dan ganti salah satu gatewaynya. supaya tidak terjadi kress pas di gabungin nanti. untuk login ke modem kalau masih stelan pabrik biasanya username = admin dan pass= admin.
saya ambil contoh modem 1 gateway nya= 192.168.2.1 dan modem 1 nya lagi= 192.168.2.2 itu hanya sebagai pembeda saja. silahkan bisa di variasi sesuka anda.
2. Seting IP Komputer
Seting Ip komputer Billing sama klient tentu saja beda. untuk menggabungkan cukup add gateway pada komputer biling. berikut langkah nya
a. masuk ke Start-seting- Network Conection
b. Klik kanan pada Local Area Conection- masuk ke Internet Protocol [ TCP/IP]- lalu tekan propertis. silahkan smuanya di isi. di karenakan saya menggunakan speedy.. maka berikut contoh gambar nya. [JANGAN TEKAN OK DULU.. BACA LANGKAH SELANJUTNYA]
Gambar untuk seting Ip Billing [ Klik gamabr untuk memperbesar]
c. Menambah Gateway pada Komputer Billing
Setelah anda masuk ke seting Local Area Conection tadi silahkan anda Klik pada Tombol Advanced- masuk ke tab IP Seting. trus lihat ke bagian Add Gateway. Klik Tombol Add nya. trus isi dengan IP yang satunya. misalkan IP di komputer tadi 192.168.2.1, maka Isi dengan yang satunya yaitu 192.168.2.2. kemudian klik tombol add. trus OK.
untuk lebih jelasnya Lihat gamabr di bawah ini
Gambar 1
Gambar 2
Gambar 3
Selesai Sudah Untuk Pengaturan Komputer Biling nya.
sekarang lanjut untuk seting IP Klient.
Untuk seting Ip Kliet letak perbedaan hanya Gateway modem nya. Misalkan ada 10 Unit komputer, maka kita bagi menjadi 2. 5 komputer kita ikutkan pada gateway modem 192.168.2.1 dan 5 lagi kita ikutkan gateway yang 192.168.2.2. Untuk langkah utamanya masih sama. masuk ke start-seting-network conection- masuk ke Local Area Conection- Klik kanan Propertis. isikan Ip nya . misalkan IP klient no 1- 5= 192.168.2.101 - 192.168.2.105, kemudian IP klient no 6-10 = 192.168.2.110
berikut contoh gambarnya
Gambar Seting IP Klient. [Klik Gambar Untuk memperbesar]
Selesai sudah seting keduanya. jadi pada intinya Masing masing komputer klient akan menarik koneksi dari amsing2 modem sesuai yang di isi gateway tadi.
Bagi yang masih bingung Silahkan Tinggal Komentar di bawah. insya allah akan saya replay.
terus terang sangat susah bagi saya untuk mengatur kata2 nya... jadi mohon maaf bila ada kata2 yang kliru. tapi intinya seperti itu.
mudah2an berguna bagi anda yang belum mengetahui ini.
______________________________________________________
Ditengarai bahwa cara ini dapat meningkatkan kecepatan koneksi internet terutama pada koneksi Dial Up atau ISDN ( Via HP ).
Requirements
To use multiple device dialing:
* Your ISP must support synchronization of multiple modems.
* You need to install multiple modems.
* You need a separate phone line for each modem.
Note :
To dial multiple devices, both your connection and your remote access server must have Multilink enabled
Bagian ini maksudnya gak ngerti nih…hehhehe.
To configure a connection:
1. Click Start, click Control Panel, click Network and Internet Connections, and then click Network Connections.
2. Click the connection that you want to configure (for example, a dial-up connection), and then, under Network Tasks, click Change settings of this connection.
3. Click the General tab, and then click each device that you want to use for this connection.
4. Use one or more of the following steps:
* To configure dialing devices, phone numbers, the host address, country or region codes, or dialing rules, click the General tab.
* To configure dialing and redialing options, or X.25 parameters, click the Options tab.
* To configure identity authentication, data encryption, or terminal window and scripting options, click the Security tab.
* To configure the remote access server and protocols that are used for this connection, click the Networking tab. Also, click Settings and select the Negotiate multi-link for single link connections check box.
* To enable or disable Internet Connection Sharing, Internet Connection Firewall, and on-demand dialing, click the Advanced tab.
Notes:
* Depending on the type of connection that you are configuring, different options and tabs appear in the connection’s properties.
Note that if you use Multilink to dial a server that requires callback, only one of your Multilink devices is called back. This occurs because you can store only one number in a user account. Therefore, only one device connects and all other devices do not connect; your connection loses Multilink functionality. You can avoid this problem:
* If the phonebook entry for the Multilink connection uses a standard modem configuration, and the remote access server that your connection is calling uses more than one line for the same number.
* If the phonebook entry for the Multilink connection is ISDN(Via HP) with two channels that have the same phone number
temen-temen tolong posting dikomentar yah, penjelasannya sesederhana mungkin.
Multilink is enabled automatically in Windows XP Home Edition and Windows XP Professional
Pastikan Load Balancingnya bekerja, dengan mengecek ulang Registry ini
Step 1,
Open regedit.
Go to [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetBT\Parameters]
Add the valuename RandomAdapter if it does not exsist, make sure you add it as a REG_DWORD (DWORD Value).
Enter 1 as a value data to enable RandomAdapter or 0 to disable it.
Step 2,
Add the valuename SingleResponse if it does not exsist, make sure you add it as a REG_DWORD (DWORD Value).
Enter 1 as a value data to enable SingleResponse or 0 to disable it.
Step 3,
Go to [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters]
Add the valuename EnableBcastArpReply if it does not exsist, make sure you add it as a REG_DWORD (DWORD Value).
Enter 1 as a value data to enable SingleResponse or 0 to disable it
Reboot your computer.
Note! Make sure both RandomAdapter, SingleResponse, and EnableBcastArpReply have the data value 1 or the load balancing will not work.
Sumber : http://support.microsoft.com/kb/307849
Baca juga artikel ini
Semoga Cara ini dapat mempercepat internet kita
Ditunggu komentarnya…
BTW, pernah kucoba dikompiku…setelah aku cek registry ternyata ReceiveWindowSize, nilainya sudah tidak default lagi…Mantap!
______________________________________________________
koneksi 2 Modem
SETUP KONEKSI MULTIPLE DEVICE (MULTILINK) PADA WINDOW XPDitengarai bahwa cara ini dapat meningkatkan kecepatan koneksi internet terutama pada koneksi Dial Up atau ISDN ( Via HP ).
Requirements
To use multiple device dialing:
* Your ISP must support synchronization of multiple modems.
* You need to install multiple modems.
* You need a separate phone line for each modem.
Note :
To dial multiple devices, both your connection and your remote access server must have Multilink enabled
Bagian ini maksudnya gak ngerti nih…hehhehe.
To configure a connection:
1. Click Start, click Control Panel, click Network and Internet Connections, and then click Network Connections.
2. Click the connection that you want to configure (for example, a dial-up connection), and then, under Network Tasks, click Change settings of this connection.
3. Click the General tab, and then click each device that you want to use for this connection.
4. Use one or more of the following steps:
* To configure dialing devices, phone numbers, the host address, country or region codes, or dialing rules, click the General tab.
* To configure dialing and redialing options, or X.25 parameters, click the Options tab.
* To configure identity authentication, data encryption, or terminal window and scripting options, click the Security tab.
* To configure the remote access server and protocols that are used for this connection, click the Networking tab. Also, click Settings and select the Negotiate multi-link for single link connections check box.
* To enable or disable Internet Connection Sharing, Internet Connection Firewall, and on-demand dialing, click the Advanced tab.
Notes:
* Depending on the type of connection that you are configuring, different options and tabs appear in the connection’s properties.
Note that if you use Multilink to dial a server that requires callback, only one of your Multilink devices is called back. This occurs because you can store only one number in a user account. Therefore, only one device connects and all other devices do not connect; your connection loses Multilink functionality. You can avoid this problem:
* If the phonebook entry for the Multilink connection uses a standard modem configuration, and the remote access server that your connection is calling uses more than one line for the same number.
* If the phonebook entry for the Multilink connection is ISDN(Via HP) with two channels that have the same phone number
temen-temen tolong posting dikomentar yah, penjelasannya sesederhana mungkin.
Multilink is enabled automatically in Windows XP Home Edition and Windows XP Professional
Pastikan Load Balancingnya bekerja, dengan mengecek ulang Registry ini
Step 1,
Open regedit.
Go to [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetBT\Parameters]
Add the valuename RandomAdapter if it does not exsist, make sure you add it as a REG_DWORD (DWORD Value).
Enter 1 as a value data to enable RandomAdapter or 0 to disable it.
Step 2,
Add the valuename SingleResponse if it does not exsist, make sure you add it as a REG_DWORD (DWORD Value).
Enter 1 as a value data to enable SingleResponse or 0 to disable it.
Step 3,
Go to [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters]
Add the valuename EnableBcastArpReply if it does not exsist, make sure you add it as a REG_DWORD (DWORD Value).
Enter 1 as a value data to enable SingleResponse or 0 to disable it
Reboot your computer.
Note! Make sure both RandomAdapter, SingleResponse, and EnableBcastArpReply have the data value 1 or the load balancing will not work.
Sumber : http://support.microsoft.com/kb/307849
Baca juga artikel ini
Semoga Cara ini dapat mempercepat internet kita
Ditunggu komentarnya…
BTW, pernah kucoba dikompiku…setelah aku cek registry ternyata ReceiveWindowSize, nilainya sudah tidak default lagi…Mantap!
Tidak ada komentar:
Posting Komentar